No hot water: a safety-first checklist
A silent water heater is a common household problem. A gas odor is not. The first step is to decide whether you should leave the building, not whether you should take the jacket off the tank.
If you smell gas, stop
If you smell gas, hear hissing you cannot explain, or suspect a leak at the water heater or the gas piping, leave the building. Do not turn lights or appliances on or off, do not use a phone inside, and do not try to shut a gas valve if doing so keeps you in the space. From outside or a neighbor’s house, call the gas utility or 911. Wait for qualified responders. This is not a do-it-yourself repair.
Limited checks when there is no gas odor
If the house is otherwise normal and you are only without hot water, a few ordinary checks may help you describe the problem to a licensed plumber. On an electric water heater, look at the circuit breaker only if you already know how to do that safely; a tripped breaker can be a symptom of a failed element, not a fix. On a gas water heater, you can look, from a normal standing position, at whether the unit has power at a display or whether a status light is on — not at a procedure for lighting a burner. Note whether every tap is cold or only some fixtures, and whether the problem started after a storm, a plumbing repair, or a change at the water heater itself.
No hot water is not always a dead heater
A failed dip tube, a thick layer of sediment, a closed isolation valve, or a mixing valve can leave you with little usable hot water even when the tank is still heating. Those are diagnosis items for a licensed plumber, especially on gas equipment. The Department of Energy’s maintenance page describes sediment draining and relief-valve checks as upkeep, not as a same-day repair script. See lifespan and maintenance and repair or replace.
When to request a licensed plumber
Call a licensed Minnesota plumber for gas appliance work, for any leak, for a relief valve that discharges, or if a simple reset did not restore hot water. City permit rules still apply if the unit has to be replaced; start at the city index. You can also request a quote through this site. A licensed local plumber will follow up.
Need a licensed plumber for the work?
You can request a quote from a licensed Twin Cities plumber. A licensed local plumber will follow up. This site is an independent reference guide and may be compensated for referrals.
Common questions
What should I do if I smell gas near the water heater?
Leave the building immediately. Do not use light switches, appliances, or phones inside. From a safe place, call the gas utility or 911. Do not go back in to troubleshoot a gas water heater.
Can I relight a gas pilot myself?
This site does not provide a lighting procedure. If you do not already know the manufacturer’s posted steps and there is any doubt about gas, ventilation, or the condition of the appliance, stop and call a licensed plumber or the gas utility.
Sources
- Maintaining Your Water Heater — U.S. Department of Energy, Energy Saver. Accessed November 20, 2026.
- Water Heating — U.S. Department of Energy, Energy Saver. Accessed November 20, 2026.
- Plumbing licenses, plan review, and permits — Minnesota Department of Labor and Industry. Accessed November 19, 2026.