Repair or replace a water heater
The useful question is not a made-up price cutoff. It is whether the tank is still sound, whether the fault is a replaceable part, and whether the installation will still meet code and rebate rules after the work.
Start with what is actually failing
A storage water heater is a tank plus a set of serviceable parts: a temperature-and-pressure relief valve, a drain valve, an anode rod, and, on electric units, heating elements and thermostats. A leak at a fitting or a valve is a different problem from water coming through the tank shell. If the tank itself is leaking, repair is usually not a lasting option. If a part has failed and the tank is otherwise sound, a licensed plumber can often service that part. This page does not invent a year at which every tank must be replaced.
What official maintenance guidance covers
The U.S. Department of Energy’s Energy Saver page on maintaining a water heater describes periodic draining to remove sediment, checking the temperature-and-pressure relief valve, and inspecting the sacrificial anode rod. Those tasks can affect how long a tank remains useful, especially where the water is hard. They are not a substitute for replacement once the tank leaks, and they are not a reason to work on a gas burner yourself. Follow the manufacturer’s manual for any procedure you are qualified to do, and leave gas work to a licensed professional.
Safety comes before a repair-or-replace debate
If you smell gas, hear roaring or sputtering at a gas burner, or see scorch marks, do not keep troubleshooting. Leave the building, avoid switches and phones inside, and contact the gas utility or emergency services from a safe place. A “no hot water” situation can have ordinary causes, but a gas appliance is not a do-it-yourself project when combustion or fuel piping may be involved. See the no-hot-water checklist.
Replacement brings permits, venting, and rebates back into the decision
A like-for-like tank swap is still plumbing (and sometimes mechanical or electrical) work. Several Twin Cities cities say a plumbing permit is required to install or replace a water heater; others publish a plumbing permit form and ask you to confirm the current rule. Start at the city index and the rebates and permits hub. If you are changing fuel type, moving to tankless, or installing a heat pump water heater, the bid will also involve venting, electrical service, or space and airflow. Those line items are explained, without invented averages, in the cost drivers guide.
Related reading: lifespan and maintenance and how to size a water heater.
Need a licensed plumber for the work?
You can request a quote from a licensed Twin Cities plumber. A licensed local plumber will follow up. This site is an independent reference guide and may be compensated for referrals.
Common questions
If the tank is leaking, can it be repaired?
A leak from the tank itself is generally a replacement issue, not a patch. Other parts — a valve, anode rod, or electric element — can sometimes be serviced. A licensed plumber should confirm where the water is coming from.
How much does a replacement cost in the Twin Cities?
This site does not invent average prices. The cost-drivers guide explains the line items that change a bid, including fuel type, venting, permits, and rebate paperwork.
When should I call a professional instead of troubleshooting?
Immediately if you smell gas, see scorching, or hear unusual burner behavior. Leave the area and contact the gas utility or emergency services from a safe place. Gas appliance work belongs to a licensed professional.
Sources
- Maintaining Your Water Heater — U.S. Department of Energy, Energy Saver. Accessed November 20, 2026.
- Conventional Storage Water Heaters — U.S. Department of Energy, Energy Saver. Accessed November 20, 2026.
- Water Heating — U.S. Department of Energy, Energy Saver. Accessed November 20, 2026.
- 2020 Minnesota Plumbing Code — Minnesota Department of Labor and Industry. Accessed November 19, 2026. Chapter 4714 took effect December 17, 2021. It incorporates the 2018 Uniform Plumbing Code with Minnesota amendments.
- Plumbing licenses, plan review, and permits — Minnesota Department of Labor and Industry. Accessed November 19, 2026.